HB5321 98TH GENERAL ASSEMBLY

LRB098 18567 RPS 53705 b

98TH GENERAL ASSEMBLY
State of Illinois
2013 and 2014
HB5321

Introduced , by Rep. Sue Scherer

SYNOPSIS AS INTRODUCED:

220 ILCS 5/8-103

Amends the Public Utilities Act. Provides that energy efficiency and demand-response measures do not apply to self-directed customers. Provides that a self-directed customer is a customer of an electric utility whose total highest 30 minute demand aggregated for all of that customer's facilities within a utility service area was more than 10,000 kilowatts or whose annual aggregated usage is 500,000,000 kilowatt hours or more in this State and who complies with certain provisions. Provides that the criteria for determining qualification as a self-directing customer shall be based on the most recent 12 consecutive billing periods prior to the customer's initial application for designation as a self-directing customer. Provides that the provisions regarding self-directed customers will no longer be applicable after January 1, 2021.

A BILL FOR

AN ACT concerning regulation.

Be it enacted by the People of the State of Illinois, represented in the General Assembly:

Section 5. The Public Utilities Act is amended by changing Section 8-103 as follows:

(220 ILCS 5/8-103)

Sec. 8-103. Energy efficiency and demand-response measures.

(a) It is the policy of the State that electric utilities are required to use cost-effective energy efficiency and demand-response measures to reduce delivery load. Requiring investment in cost-effective energy efficiency and demand-response measures will reduce direct and indirect costs to consumers by decreasing environmental impacts and by avoiding or delaying the need for new generation, transmission, and distribution infrastructure. It serves the public interest to allow electric utilities to recover costs for reasonably and prudently incurred expenses for energy efficiency and demand-response measures. As used in this Section, "cost-effective" means that the measures satisfy the total resource cost test. The low-income measures described in subsection (f)(4) of this Section shall not be required to meet the total resource cost test. For purposes of this Section, the terms "energy-efficiency", "demand-response", "electric utility", and "total resource cost test" shall have the meanings set forth in the Illinois Power Agency Act. For purposes of this Section, the amount per kilowatthour means the total amount paid for electric service expressed on a per kilowatthour basis. For purposes of this Section, the total amount paid for electric service includes without limitation estimated amounts paid for supply, transmission, distribution, surcharges, and add-on-taxes.

(b) Electric utilities shall implement cost-effective energy efficiency measures to meet the following incremental annual energy savings goals:

(1) 0.2% of energy delivered in the year commencing June 1, 2008;

(2) 0.4% of energy delivered in the year commencing June 1, 2009;

(3) 0.6% of energy delivered in the year commencing June 1, 2010;

(4) 0.8% of energy delivered in the year commencing June 1, 2011;

(5) 1% of energy delivered in the year commencing June 1, 2012;

(6) 1.4% of energy delivered in the year commencing June 1, 2013;

(7) 1.8% of energy delivered in the year commencing June 1, 2014; and

(8) 2% of energy delivered in the year commencing June 1, 2015 and each year thereafter.

Electric utilities may comply with this subsection (b) by meeting the annual incremental savings goal in the applicable year or by showing that the total cumulative annual savings within a 3-year planning period associated with measures implemented after May 31, 2014 was equal to the sum of each annual incremental savings requirement from May 31, 2014 through the end of the applicable year.

(c) Electric utilities shall implement cost-effective demand-response measures to reduce peak demand by 0.1% over the prior year for eligible retail customers, as defined in Section 16-111.5 of this Act, and for customers that elect hourly service from the utility pursuant to Section 16-107 of this Act, provided those customers have not been declared competitive. This requirement commences June 1, 2008 and continues for 10 years.

(d) Notwithstanding the requirements of subsections (b) and (c) of this Section, an electric utility shall reduce the amount of energy efficiency and demand-response measures implemented over a 3-year planning period by an amount necessary to limit the estimated average annual increase in the amounts paid by retail customers in connection with electric service due to the cost of those measures to:

(1) in 2008, no more than 0.5% of the amount paid per kilowatthour by those customers during the year ending May 31, 2007;

(2) in 2009, the greater of an additional 0.5% of the amount paid per kilowatthour by those customers during the year ending May 31, 2008 or 1% of the amount paid per kilowatthour by those customers during the year ending May 31, 2007;

(3) in 2010, the greater of an additional 0.5% of the amount paid per kilowatthour by those customers during the year ending May 31, 2009 or 1.5% of the amount paid per kilowatthour by those customers during the year ending May 31, 2007;

(4) in 2011, the greater of an additional 0.5% of the amount paid per kilowatthour by those customers during the year ending May 31, 2010 or 2% of the amount paid per kilowatthour by those customers during the year ending May 31, 2007; and

(5) thereafter, the amount of energy efficiency and demand-response measures implemented for any single year shall be reduced by an amount necessary to limit the estimated average net increase due to the cost of these measures included in the amounts paid by eligible retail customers in connection with electric service to no more than the greater of 2.015% of the amount paid per kilowatthour by those customers during the year ending May 31, 2007 or the incremental amount per kilowatthour paid for these measures in 2011.

No later than June 30, 2011, the Commission shall review the limitation on the amount of energy efficiency and demand-response measures implemented pursuant to this Section and report to the General Assembly its findings as to whether that limitation unduly constrains the procurement of energy efficiency and demand-response measures.

(e) Electric utilities shall be responsible for overseeing the design, development, and filing of energy efficiency and demand-response plans with the Commission. Electric utilities shall implement 100% of the demand-response measures in the plans. Electric utilities shall implement 75% of the energy efficiency measures approved by the Commission, and may, as part of that implementation, outsource various aspects of program development and implementation. The remaining 25% of those energy efficiency measures approved by the Commission shall be implemented by the Department of Commerce and Economic Opportunity, and must be designed in conjunction with the utility and the filing process. The Department may outsource development and implementation of energy efficiency measures. A minimum of 10% of the entire portfolio of cost-effective energy efficiency measures shall be procured from units of local government, municipal corporations, school districts, and community college districts. The Department shall coordinate the implementation of these measures.

The apportionment of the dollars to cover the costs to implement the Department's share of the portfolio of energy efficiency measures shall be made to the Department once the Department has executed rebate agreements, grants, or contracts for energy efficiency measures and provided supporting documentation for those rebate agreements, grants, and contracts to the utility. The Department is authorized to adopt any rules necessary and prescribe procedures in order to ensure compliance by applicants in carrying out the purposes of rebate agreements for energy efficiency measures implemented by the Department made under this Section.

The details of the measures implemented by the Department shall be submitted by the Department to the Commission in connection with the utility's filing regarding the energy efficiency and demand-response measures that the utility implements.

A utility providing approved energy efficiency and demand-response measures in the State shall be permitted to recover costs of those measures through an automatic adjustment clause tariff filed with and approved by the Commission. The tariff shall be established outside the context of a general rate case. Each year the Commission shall initiate a review to reconcile any amounts collected with the actual costs and to determine the required adjustment to the annual tariff factor to match annual expenditures.

Each utility shall include, in its recovery of costs, the costs estimated for both the utility's and the Department's implementation of energy efficiency and demand-response measures. Costs collected by the utility for measures implemented by the Department shall be submitted to the Department pursuant to Section 605-323 of the Civil Administrative Code of Illinois, shall be deposited into the Energy Efficiency Portfolio Standards Fund, and shall be used by the Department solely for the purpose of implementing these measures. A utility shall not be required to advance any moneys to the Department but only to forward such funds as it has collected. The Department shall report to the Commission on an annual basis regarding the costs actually incurred by the Department in the implementation of the measures. Any changes to the costs of energy efficiency measures as a result of plan modifications shall be appropriately reflected in amounts recovered by the utility and turned over to the Department.

The portfolio of measures, administered by both the utilities and the Department, shall, in combination, be designed to achieve the annual savings targets described in subsections (b) and (c) of this Section, as modified by subsection (d) of this Section.

The utility and the Department shall agree upon a reasonable portfolio of measures and determine the measurable corresponding percentage of the savings goals associated with measures implemented by the utility or Department.

No utility shall be assessed a penalty under subsection (f) of this Section for failure to make a timely filing if that failure is the result of a lack of agreement with the Department with respect to the allocation of responsibilities or related costs or target assignments. In that case, the Department and the utility shall file their respective plans with the Commission and the Commission shall determine an appropriate division of measures and programs that meets the requirements of this Section.

If the Department is unable to meet incremental annual performance goals for the portion of the portfolio implemented by the Department, then the utility and the Department shall jointly submit a modified filing to the Commission explaining the performance shortfall and recommending an appropriate course going forward, including any program modifications that may be appropriate in light of the evaluations conducted under item (7) of subsection (f) of this Section. In this case, the utility obligation to collect the Department's costs and turn over those funds to the Department under this subsection (e) shall continue only if the Commission approves the modifications to the plan proposed by the Department.

(f) No later than November 15, 2007, each electric utility shall file an energy efficiency and demand-response plan with the Commission to meet the energy efficiency and demand-response standards for 2008 through 2010. No later than October 1, 2010, each electric utility shall file an energy efficiency and demand-response plan with the Commission to meet the energy efficiency and demand-response standards for 2011 through 2013. Every 3 years thereafter, each electric utility shall file, no later than September 1, an energy efficiency and demand-response plan with the Commission. If a utility does not file such a plan by September 1 of an applicable year, it shall face a penalty of $100,000 per day until the plan is filed. Each utility's plan shall set forth the utility's proposals to meet the utility's portion of the energy efficiency standards identified in subsection (b) and the demand-response standards identified in subsection (c) of this Section as modified by subsections (d) and (e), taking into account the unique circumstances of the utility's service territory. The Commission shall seek public comment on the utility's plan and shall issue an order approving or disapproving each plan within 5 months after its submission. If the Commission disapproves a plan, the Commission shall, within 30 days, describe in detail the reasons for the disapproval and describe a path by which the utility may file a revised draft of the plan to address the Commission's concerns satisfactorily. If the utility does not refile with the Commission within 60 days, the utility shall be subject to penalties at a rate of $100,000 per day until the plan is filed. This process shall continue, and penalties shall accrue, until the utility has successfully filed a portfolio of energy efficiency and demand-response measures. Penalties shall be deposited into the Energy Efficiency Trust Fund. In submitting proposed energy efficiency and demand-response plans and funding levels to meet the savings goals adopted by this Act the utility shall:

(1) Demonstrate that its proposed energy efficiency and demand-response measures will achieve the requirements that are identified in subsections (b) and (c) of this Section, as modified by subsections (d) and (e).

(2) Present specific proposals to implement new building and appliance standards that have been placed into effect.

(3) Present estimates of the total amount paid for electric service expressed on a per kilowatthour basis associated with the proposed portfolio of measures designed to meet the requirements that are identified in subsections (b) and (c) of this Section, as modified by subsections (d) and (e).

(4) Coordinate with the Department to present a portfolio of energy efficiency measures proportionate to the share of total annual utility revenues in Illinois from households at or below 150% of the poverty level. The energy efficiency programs shall be targeted to households with incomes at or below 80% of area median income.

(5) Demonstrate that its overall portfolio of energy efficiency and demand-response measures, not including programs covered by item (4) of this subsection (f), are cost-effective using the total resource cost test and represent a diverse cross-section of opportunities for customers of all rate classes to participate in the programs.

(6) Include a proposed cost-recovery tariff mechanism to fund the proposed energy efficiency and demand-response measures and to ensure the recovery of the prudently and reasonably incurred costs of Commission-approved programs.

(7) Provide for an annual independent evaluation of the performance of the cost-effectiveness of the utility's portfolio of measures and the Department's portfolio of measures, as well as a full review of the 3-year results of the broader net program impacts and, to the extent practical, for adjustment of the measures on a going-forward basis as a result of the evaluations. The resources dedicated to evaluation shall not exceed 3% of portfolio resources in any given year.

(g) No more than 3% of energy efficiency and demand-response program revenue may be allocated for demonstration of breakthrough equipment and devices.

(h) This Section does not apply to an electric utility that on December 31, 2005 provided electric service to fewer than 100,000 customers in Illinois.

(i) If, after 2 years, an electric utility fails to meet the efficiency standard specified in subsection (b) of this Section, as modified by subsections (d) and (e), it shall make a contribution to the Low-Income Home Energy Assistance Program. The combined total liability for failure to meet the goal shall be $1,000,000, which shall be assessed as follows: a large electric utility shall pay $665,000, and a medium electric utility shall pay $335,000. If, after 3 years, an electric utility fails to meet the efficiency standard specified in subsection (b) of this Section, as modified by subsections (d) and (e), it shall make a contribution to the Low-Income Home Energy Assistance Program. The combined total liability for failure to meet the goal shall be $1,000,000, which shall be assessed as follows: a large electric utility shall pay $665,000, and a medium electric utility shall pay $335,000. In addition, the responsibility for implementing the energy efficiency measures of the utility making the payment shall be transferred to the Illinois Power Agency if, after 3 years, or in any subsequent 3-year period, the utility fails to meet the efficiency standard specified in subsection (b) of this Section, as modified by subsections (d) and (e). The Agency shall implement a competitive procurement program to procure resources necessary to meet the standards specified in this Section as modified by subsections (d) and (e), with costs for those resources to be recovered in the same manner as products purchased through the procurement plan as provided in Section 16-111.5. The Director shall implement this requirement in connection with the procurement plan as provided in Section 16-111.5.

For purposes of this Section, (i) a "large electric utility" is an electric utility that, on December 31, 2005, served more than 2,000,000 electric customers in Illinois; (ii) a "medium electric utility" is an electric utility that, on December 31, 2005, served 2,000,000 or fewer but more than 100,000 electric customers in Illinois; and (iii) Illinois electric utilities that are affiliated by virtue of a common parent company are considered a single electric utility.

(j) If, after 3 years, or any subsequent 3-year period, the Department fails to implement the Department's share of energy efficiency measures required by the standards in subsection (b), then the Illinois Power Agency may assume responsibility for and control of the Department's share of the required energy efficiency measures. The Agency shall implement a competitive procurement program to procure resources necessary to meet the standards specified in this Section, with the costs of these resources to be recovered in the same manner as provided for the Department in this Section.

(k) No electric utility shall be deemed to have failed to meet the energy efficiency standards to the extent any such failure is due to a failure of the Department or the Agency.

(l) Subsections (a) through (k) of this Section do not apply to any customer of an electric utility whose total highest 30 minute demand aggregated for all of such customer's facilities within a utility service area was more than 10,000 kilowatts or whose annual aggregated usage is 500,000,000 kilowatt hours or more in this State and that complies with the provisions of paragraph (1) of this subsection (l). These criteria for determining qualification as a self-directing customer ("SDC") shall be based on the most recent 12 consecutive billing periods prior to the customer's initial application for designation as a SDC.

(1) Customers described in this subsection (l) shall apply to the Department, on a form approved by the Department on or before October 1, 2014, to be designated as a SDC on or before February 1, 2015. Thereafter, an application may be made not less than 6 months before the filing date of the electric utility energy efficiency and demand-response plan described in subsection (f) of this Section; however, a new customer that commences taking service from an electric utility after February 1, 2015 may apply to become a SDC up to 30 days after beginning service. The application shall contain the following:

(A) the customer's certification that, at the time of its application, it qualifies to be a SDC described in this subsection (l);

(B) the customer's certification that it has established or shall establish, by the beginning of the utility's 3-year planning period commencing subsequent to the application, and shall maintain for accounting purposes an energy efficiency reserve account and that the customer shall accrue funds in the account to be held for the purpose of funding, in whole or in part, energy efficiency measures of the customer's choosing, which may include, but are not limited to, projects involving combined heat and power systems that use the same energy source both for the generation of electrical or mechanical power and the production of steam or another form of useful thermal energy or the use of combustible gas produced from biomass or both;

(C) the customer's certification that annual funding levels for the energy efficiency reserve account shall be equal to 2% of the customer's cost of electricity, composed of the customer's commodity cost and the delivery service charges paid to the electric utility;

(D) in the case of customers who use one or more electric arc furnaces with an annual usage of greater than 50% of the customer's total annual electricity usage, the required annual funding levels described in subparagraph (C) of paragraph (1) of this subsection (l) shall be based on the electricity usage not directly used by the electric arc furnaces;

(E) the customer's certification that the required reserve account balance shall be capped at 3 years' worth of accruals and that the customer may, at its option, make further deposits to the account to the extent such a deposit would increase the reserve account balance above the designated cap level;

(F) the customer's certification that by October 1 of each year, beginning no sooner than October 1, 2016, the customer shall report to the Department, for the 12-month period ending May 31 of the same year, information on all deposits and reductions, if any, to the reserve account during the reporting year; reserve account balances by month; a description of energy efficiency measures undertaken by the customer and paid for in whole or in part with funds from the reserve account; and an estimate of the energy saved or to be saved by the measure and that the report shall include a verification, by an officer or plant manager of the customer or by a registered professional engineer or certified, energy-efficiency trade professional, that the funds withdrawn from the reserve account were used for the energy efficiency measures;

(G) in the case of a customer with one or more electric arc furnaces that meet the criteria described in subparagraph (D) of paragraph (1) of this subsection (l), the customer's certification of the level of electricity usage for powering its electric arc furnaces in a typical year and that it shall provide information establishing this level, upon request of the Department;

(H) the customer's certification that it has provided the electric utility or utilities serving the customer with a copy of the application as filed with the Department;

(I) the customer's certification of the electric utility or utilities serving the customer in this State, including the electric utility accounts that are the subject of the application; and

(J) the customer's verification, signed by a plant manager or an authorized corporate officer, attesting to the truthfulness and accuracy of the information contained in the application.

(2) The Department shall review the application to determine that it contains the information described in subparagraphs (A) through (J) of paragraph (1) of this subsection (l), as applicable. The review shall be completed within 30 days after the date the application is filed with the Department. Absent a determination by the Department within the 30-day period, the applicant shall be considered to be a customer for all subsequent 3-year planning periods, as of the date of filing the application described in this subsection (l). If the Department determines that the application does not contain the applicable information described in subparagraphs (A) through (J) of paragraph (1) of this subsection (l), it shall notify the customer, in writing, of its determination that the application does not contain the required information and identify the information that is missing, and the customer shall provide the missing information within 15 working days after the date of receipt of the Department's notification.

(3) The Department shall have the right to audit the information provided in the customer's application and its annual reports to ensure continued compliance with the requirements of this subsection (l). Based on the audit, if the Department determines the customer is no longer in compliance with the requirements of subparagraphs (A) through (J) of paragraph (1) of this subsection (l), as applicable, the Department shall notify the customer in writing of the noncompliance. The customer shall have 30 days to establish its compliance and, failing to do so, may have its status as a SDC or exempt customer revoked by the Department. The Department shall treat all information provided by any customer seeking SDC status or exemption from the provisions of this Section as strictly confidential.

(4) Upon request or on its own motion, the Commission may open an investigation, no more than once every 3 years and not before October 1, 2017, to evaluate the effectiveness of the self-directing program described in this subsection (l).

(m) The applicability of this Section to customers described in subsection (l) of this Section is conditioned on the existence of the SDC program. In no event shall any provision of this Section apply to such customers after January 1, 2021.

(Source: P.A. 97-616, eff. 10-26-11; 97-841, eff. 7-20-12; 98-90, eff. 7-15-13.)