|
| | 09700HB2842ham002 | - 2 - | LRB097 09038 HEP 52714 a |
|
|
1 | | (1) the seat assembly exhibits a weight loss of 3 |
2 | | pounds or greater during the first 10 minutes of the test; |
3 | | or |
4 | | (2) the seat assembly exhibits a heat release rate of |
5 | | 80 kW or greater. |
6 | | As an alternative to the ASTM E1537-07 standard test, |
7 | | school bus occupant seating may be required to pass the "School |
8 | | Bus Seat Upholstery Fire Block Test" as described in the latest |
9 | | edition of the National School Transportation Specifications |
10 | | and Procedures published by the National Congress on School |
11 | | Transportation. |
12 | | (c) All plastic components contained in the engine |
13 | | compartment of all new school buses put in service on or after |
14 | | January 1, 2014 shall meet a V-0 classification when tested in |
15 | | accordance with the Underwriters Laboratories UL 94 standard |
16 | | for safety. |
17 | | (d) The Illinois Department of Transportation shall adopt |
18 | | rules to promote the fire safety of school buses and implement |
19 | | the provisions of this Section. On and after the date the rules |
20 | | take effect, no new school bus shall be sold or offered for |
21 | | sale in this State unless the manufacturer has certified to the |
22 | | Illinois Department of Transportation, in a form acceptable to |
23 | | the Illinois Department of Transportation, that the fire safety |
24 | | standards prescribed by this Section have been met. ".
|