Sen. Thomas Cullerton

Filed: 5/8/2018

 

 


 

 


 
10000SB2953sam002LRB100 19768 JLS 39599 a

1
AMENDMENT TO SENATE BILL 2953

2    AMENDMENT NO. ______. Amend Senate Bill 2953, AS AMENDED,
3by replacing everything after the enacting clause with the
4following:
 
5    "Section 5. The Illinois Insurance Code is amended by
6changing Section 155.29 as follows:
 
7    (215 ILCS 5/155.29)  (from Ch. 73, par. 767.29)
8    Sec. 155.29. (a) Purpose. The purpose of this Section is to
9regulate the use of aftermarket crash parts by requiring
10disclosure when any use of an aftermarket non-original
11equipment manufacturer's crash part is proposed and by
12requiring that the manufacturers of such aftermarket crash
13parts be identified.
14    (b) Definitions. As used in this Section the following
15terms have the following meanings:
16    "Aftermarket crash part" means a replacement for any of the

 

 

10000SB2953sam002- 2 -LRB100 19768 JLS 39599 a

1nonmechanical sheet metal or plastic parts that generally
2constitute the exterior of a motor vehicle, including inner and
3outer panels.
4    "Non-original equipment manufacturer (Non-OEM) aftermarket
5crash part" means an aftermarket crash part not made for or by
6the manufacturer of the motor vehicle.
7    "Repair facility" means any motor vehicle dealer, garage,
8body shop, or other commercial entity that undertakes the
9repair or replacement of those parts that generally constitute
10the exterior of a motor vehicle.
11    "Installer" means an individual who actually does the work
12of replacing or repairing parts of a motor vehicle.
13    (c) Identification. Any aftermarket crash part supplied by
14a non-original equipment manufacturer for use in this State
15after the effective date of this Act shall have affixed thereto
16or inscribed thereon the logo or name of its manufacturer. The
17manufacturer's logo or name shall be visible after installation
18whenever practicable.
19    (d) Disclosure. No insurer shall specify the use of non-OEM
20aftermarket crash parts in the repair of an insured's motor
21vehicle, nor shall any repair facility or installer use non-OEM
22aftermarket crash parts to repair a vehicle unless the customer
23is advised of that fact in writing. In all instances where an
24insurer intends that non-OEM aftermarket crash parts be used in
25the repair of a motor vehicle, the insurer shall provide the
26customer with the following information:

 

 

10000SB2953sam002- 3 -LRB100 19768 JLS 39599 a

1        (1) a written estimate that clearly identifies each
2    non-OEM aftermarket crash part; and
3        (2) a disclosure settlement incorporated into or
4    attached to the estimate that reads as follows: "This
5    estimate has been prepared based on the use of crash parts
6    supplied by a source other than the manufacturer of your
7    motor vehicle. Warranties applicable to these replacement
8    parts are provided by the manufacturer or distributor of
9    these parts rather than the manufacturer of your vehicle."
10    (e) Procedures. No repair facility or installer may use
11repair specifications or procedures that are not in compliance
12with the original equipment manufacturer for those parts.
13(Source: P.A. 86-1234; 86-1475.)
 
14    Section 10. The Automotive Collision Repair Act is amended
15by changing Section 15 as follows:
 
16    (815 ILCS 308/15)
17    Sec. 15. Disclosure to consumers; estimates.
18    (a) No work for compensation that exceeds $100 shall be
19commenced without specific authorization from the consumer
20after the disclosure set forth in this Section.
21    (b) Every motor vehicle collision repair facility shall
22either (i) give to each consumer a written estimated price for
23labor and parts for a specific repair and shall not charge for
24work done or parts supplied in an amount that exceeds the

 

 

10000SB2953sam002- 4 -LRB100 19768 JLS 39599 a

1estimate by more than 10% without oral or written consent from
2the consumer; or (ii) give to each consumer a written price
3limit for each specific repair and shall not exceed that limit
4without oral or written consent of the consumer. The estimate
5shall include the total costs to repair the motor vehicle.
6    Estimates shall include all charges to be paid by the
7consumer to complete the repair, including any charges for
8estimates, diagnostics, storage, and administrative fees.
9    (c) Motor vehicle collision repair facilities shall
10describe in the estimate the major parts needed to effectuate
11the repair and shall designate the parts as either new parts,
12used parts, rebuilt or reconditioned parts, or aftermarket
13parts as set forth in Section 10 of this Act.
14    (d) Estimates shall indicate that the collision repair
15facility may use a combination of industry standard flat rate
16(time) manuals, actual time, or condition of the motor vehicle
17to determine labor costs. This disclosure mandate may also be
18fulfilled by means of a sign that provides the same information
19to the consumer. The sign shall be posted at a location that
20can be easily viewed by the consumer.
21    (e) If it is necessary to disassemble or partially
22disassemble a motor vehicle or motor vehicle component in order
23to provide the consumer a written estimate for required
24repairs, the estimate shall show the cost of any disassembly if
25the consumer elects not to proceed with the repair of the motor
26vehicle.

 

 

10000SB2953sam002- 5 -LRB100 19768 JLS 39599 a

1    (f) The estimate shall include the date the estimate was
2prepared or the date the motor vehicle was presented to the
3collision repair facility for repair and the odometer reading
4on the motor vehicle at the time the motor vehicle was left
5with the collision repair facility.
6    (g) No estimate may include the use of a non-original
7equipment manufacturer aftermarket crash parts unless
8authorized by the customer in writing. This subsection applies
9only to automobiles that are less than 48 months beyond the
10date of manufacture.
11    (h) The estimate shall include the use of repair
12specifications by the original equipment manufacturer for
13those parts, and no repair facility or installer may use repair
14specifications or procedures that are not in compliance with
15the original equipment manufacturer for those parts.
16(Source: P.A. 93-565, eff. 1-1-04.)".