(625 ILCS 5/12-218)

(Text of Section before amendment by P.A. 103-374)

Sec. 12-218. Auxiliary accent lighting on motorcycles.

(a) A motorcycle registered in this State may be equipped with, and a person operating the motorcycle may use, standard bulb running lights or light-emitting diode (L.E.D.) pods and strips as auxiliary lighting with the intent of protecting the driver.

(b) Auxiliary lighting authorized under subsection (a) of this Section:

(1) shall not project a beam of light of an intensity greater than 25 candlepower or its equivalent from a single lamp or single light-emitting diode (L.E.D.);

(2) shall not be directed horizontally;

(3) shall be so directed that no part of the beam will strike the level of the surface on which the motorcycle stands at a distance of more than 10 feet from the motorcycle;

(4) shall be directed towards the ground;

(5) shall not emit red or blue light;

(6) shall not be:

(A) blinking;

(B) flashing;

(C) oscillating; or

(D) rotating; and

(7) shall not be attached to the wheels of the motorcycle.

(Source: P.A. 99-242, eff. 8-3-15.)

(Text of Section after amendment by P.A. 103-374)

Sec. 12-218. Auxiliary accent lighting on motorcycles.

(a) A motorcycle registered in this State may be equipped with, and a person operating the motorcycle may use, standard bulb running lights or light-emitting diode (L.E.D.) pods and strips as auxiliary lighting with the intent of protecting the driver.

(b) Auxiliary lighting authorized under subsection (a) of this Section:

(1) shall not project a beam of light of an intensity greater than 25 candlepower or its equivalent from a single lamp or single light-emitting diode (L.E.D.);

(2) shall not be directed horizontally;

(3) shall be so directed that no part of the beam will strike the level of the surface on which the motorcycle stands at a distance of more than 10 feet from the motorcycle;

(4) shall be directed towards the ground;

(5) shall not emit blue light, but may emit red light only while the stop lamp on the motorcycle is illuminated and motorcycle is in the course of braking;

(6) shall not be:

(A) blinking;

(B) flashing;

(C) oscillating; or

(D) rotating; and

(7) shall not be attached to the wheels of the motorcycle.

(Source: P.A. 103-374, eff. 1-1-24.)