TITLE 35: ENVIRONMENTAL PROTECTION
SUBTITLE G: WASTE DISPOSAL
CHAPTER I: POLLUTION CONTROL BOARD
SUBCHAPTER i: SOLID WASTE AND SPECIAL WASTE HAULING
PART 811 STANDARDS FOR NEW SOLID WASTE LANDFILLS
SECTION 811.106 DAILY COVER


 

Section 811.106  Daily Cover

 

a)         A uniform layer of at least 0.15 meter (six inches) of clean soil material must be placed on all exposed waste by the end of each day of operation.

 

b)         Alternative materials or procedures, including the removal of daily cover prior to additional waste placement, may be used, provided that the alternative materials or procedures achieve equivalent or superior performance to the requirements of subsection (a) in the following areas:

 

1)         Prevention of blowing debris;

 

2)         Minimization of access to the waste by vectors;

 

3)         Minimization of the threat of fires at the open face; and

 

4)         Minimization of odors.

 

c)         Any alternative frequencies for cover requirements to those set forth in subsections (a) and (b) for any owner or operator of an MSWLF that disposes of 20 tons (18 megagrams) of municipal solid waste per day or less, based on an annual average, must be established by an adjusted standard pursuant to Section 28.1 of the Act and Subpart D of 35 Ill. Adm. Code 104. Any alternative requirements established under this subsection (c) must fulfill the following requirements:

 

1)         They must consider the unique characteristics of small communities;

 

2)         They must take into account climatic and hydrogeologic conditions; and

 

3)         They must be protective of human health and the environment.

 

BOARD NOTE:  This subsection (c) is derived from 40 CFR 258.21(d) (2017).

 

(Source:  Amended at 42 Ill. Reg. 21330, effective November 19, 2018)