SUBTITLE G: WASTE DISPOSAL
CHAPTER I: POLLUTION CONTROL BOARD
SUBCHAPTER c: HAZARDOUS WASTE OPERATING REQUIREMENTS
PART 721 IDENTIFICATION AND LISTING OF HAZARDOUS WASTE
SECTION 721.130 GENERAL
Section 721.130 General
a) A solid waste is a hazardous waste if it is listed in this Subpart D unless it has been excluded from this list under 35 Ill. Adm. Code 720.120 and 720.122.
b) The basis for listing the classes or types of wastes listed in this Subpart D is indicated by employing one or more of the following hazard codes:
1) Hazard Codes.
|
A) |
Ignitable waste |
(I) |
|
|
||
|
B) |
Corrosive waste |
(C) |
|
|
||
|
C) |
Reactive waste |
(R) |
|
|
||
|
D) |
Toxicity Characteristic waste |
(E) |
|
|
||
|
E) |
Acute hazardous waste |
(H) |
|
|
||
|
F) |
Toxic waste |
(T) |
2) Appendix G identifies the constituent that caused USEPA to list the waste as a toxicity characteristic waste (E) or toxic waste (T) in Sections 721.131 and 721.132.
c) Each hazardous waste listed in this Subpart D is assigned a USEPA hazardous waste number that precedes the name of the waste. This number must be used in complying with the federal notification requirements of section 3010 of RCRA (42 USC 6930) and certain recordkeeping and reporting requirements under 35 Ill. Adm. Code 702, 703, and 722 through 725, 727, and 728.
d) The following hazardous wastes listed in Section 721.131 or 721.132 are subject to the generator category limits for acute hazardous wastes established in 35 Ill. Adm. Code 722.113(g): hazardous wastes numbers F020, F021, F022, F023, F026, and F027.
(Source: Amended at 48 Ill. Reg. 16813, effective November 7, 2024)